You are here: Home Products Microcraft Microcraft EMX12181

Microcraft EMX12181

Specifications
Max. Board Size
47 x 31.5″(1200 x 800mm)
Number of Probe
2 Front, 2 Rear
Min. Board Size
1.3 x 2.6″(35 x 65mm)
Max. Board Thickness for Clamping
0.511″(13mm)
Repeatable Accuracy
±0.000157″(±4µm)
Resolution
0.000236″(6µm)
Min. Pad Pitch†1
0.007087″(180µm)
Min. Pad Size†2
0.00314″(80µm)
Test Voltage of Resistance Measurement
Continuity test : 0-10V Isolation test : 250V(500V/1000V option)
Test Current of Resistance Measurement
Continuity test : 2.65 µA-125mA
Clamp System
Pneumatic
Number of CCD Camera
2 Front, 2 Rear
Monitor
included
Printer
internal
Air Requirements(Pressure, Consumption)
0.5MPa, 1.5gal/min.(5.7Ltr/min.)
Power Supply (Single Phase AC200-240V 50/60Hz)†3
15A
Weight
3480lbs.(1670kg)
Dimensions

†1 When Probe (T96MC-PB-0R40) used.
†2 When Probe (T96MC-PB-0B00) used.
†3 Power Supply : There is a case incoming current about decuple of amperage rating might pass when power is on. Please choose breaker that will not cause any malfunction by this incoming current.
[System Requirements] Control PC & Monitor
[Software] EMMA2000 is standard, Ask our sales department about our optional software.
[Probe Type] Users can choose one of different types of probes depending on tester models. Please ask our sales for specifications of each probe & PC.
[Operating Conditions] 70-75°F (21-24°C), 30-70% relative humidity, non-condensing, no dust, no vibration, no corrosive gas.
Please click here to view flyer for EMX12181(PDF:449KB)